[NSRCA-discussion] O-Ring for Hatori Short Pipe

[vicenterc at comcast.net]

That is 15.47 mm ID and 22.53 OD.  It is close to 15 and 22 mm.  Let us know if works in the long run.  

Thanks,

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: "Richard Lewis" <humptybump at sbcglobal.net> 

I bought 9464K67 from McMaster
 
Viton O-Ring, 5/8 x 7/8 (Actual 0.609 I.D. and 0.887 O.D.) 
 
They are somewhat harder than the original, but the size seems perfect.
 
I’m using it now, but only have about 10 flights on it.  So far so good, no evidence of leaks at all.  These also fit the MK tailwheel hub nicely..:)
 
We looked up the metric ones, but I did not think any of the metric dims were close enough…Let us know how the metrics work out for you.
 
Richard Lewis
 



From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Konneker
Sent: Thursday, June 26, 2008 2:26 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] O-Ring for Hatori Short Pipe
 
I just ordered some of these from McMaster Carr.  I should have them tomorrow.
Maybe someone can comment if these are the ones to use.
9263K772 Metric Viton O-Ring 3.5 mm Width, 16 mm ID, Packs of 10 (Same as 9263K11)
 
 


JLK



Date: Thu, 26 Jun 2008 15:03:39 -0400
From: atwoodm at paragon-inc.com
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] O-Ring for Hatori Short Pipe
Can someone direct me to a source (or several) for replacement o-rings to connect the Hatori 821 short pipe to the Hatori 822 header?  Central is out of the authentic Hatori O-rings and won’t have more for a while.  Is there another source, or a suitable replacement available?  

Thanks,

Mark


No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.4.1/1515 - Release Date: 6/23/2008 7:16 PM



No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.4.1/1515 - Release Date: 6/23/2008 7:16 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080627/a683e862/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: "Richard Lewis" <humptybump at sbcglobal.net>
Subject: Re: [NSRCA-discussion] O-Ring for Hatori Short Pipe
Date: Fri, 27 Jun 2008 00:32:00 +0000
Size: 732
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080627/a683e862/attachment.mht>