[NSRCA-discussion] O-Ring for Hatori Short Pipe

[vicenterc at comcast.net]

John,

The package says 15 mm.  I measured one used and looks like it is 15 mm.

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: John Konneker <jlkonn at hotmail.com> 
I just ordered some of these from McMaster Carr.  I should have them tomorrow.
Maybe someone can comment if these are the ones to use.
9263K772 Metric Viton O-Ring 3.5 mm Width, 16 mm ID, Packs of 10 (Same as 9263K11)



JLK




Date: Thu, 26 Jun 2008 15:03:39 -0400
From: atwoodm at paragon-inc.com
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] O-Ring for Hatori Short Pipe


Can someone direct me to a source (or several) for replacement o-rings to connect the Hatori 821 short pipe to the Hatori 822 header?  Central is out of the authentic Hatori O-rings and won’t have more for a while.  Is there another source, or a suitable replacement available?  

Thanks,

Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080627/1d394ebb/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: John Konneker <jlkonn at hotmail.com>
Subject: Re: [NSRCA-discussion] O-Ring for Hatori Short Pipe
Date: Thu, 26 Jun 2008 19:26:48 +0000
Size: 720
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080627/1d394ebb/attachment.mht>