[NSRCA-discussion] Electric newbee question...

[John Ferrell]

I have a bit of experience with connectors of this nature and I am comfortable working with them. However, considering the fact that a short between the pins would likely do serious damage I think I will try to find the parts for an adapter rather than attempt rework. Besides, the plastic moldings are not the same size.
I bought the stuff used from individuals.

John Ferrell    W8CCW
 
"All that is necessary for the triumph of evil is for good men to do nothing." -- Edmund Burke
http://DixieNC.US

  ----- Original Message ----- 
  From: Ihncheol Park 
  To: 'General pattern discussion' 
  Sent: Sunday, June 22, 2008 5:32 PM
  Subject: Re: [NSRCA-discussion] Electric newbee question...


  John,

  Is the battery from Commonsense RC?
  Depending on connectors, some of them has wires just soldered to the pins and each one of then can be carefully pull out of the connector.  With a #11 blade tip, you can also pull the wires out of the balancer connectors on some of batteries

  You should be able to find a balancer connector converter or can make them with one female that fits on the pack and one male that matches the charger/balancer you have.

  Ihncheol



------------------------------------------------------------------------------
  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Ferrell
  Sent: Sunday, June 22, 2008 2:23 PM
  To: NSRCA Mailing List
  Subject: [NSRCA-discussion] Electric newbee question...


  I bought a heli (Align-Trex 450) from one fellow that uses 3S-2100 mah LiPo's and an airplane from another guy that uses the same batteries (ThunderPower). 
  The balance connectors are a little different in size but it appears to me that the wiring is exactly opposite between the two. 

  Is the common practice simply to fabricate/buy an adapter cable to charge them?

  John Ferrell    W8CCW
   
  "All that is necessary for the triumph of evil is for good men to do nothing." -- Edmund Burke
  http://DixieNC.US



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080622/b0280a41/attachment-0001.html>