[NSRCA-discussion] Vinyl Graphics

[Jay Marshall]

Thanks to all for the info. 

Jay Marshall

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dean Funk
Sent: Sunday, June 08, 2008 7:29 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Vinyl Graphics

Hi Jay,

The vinyl material that I am using is a very high tack material. What I ship
with my kits is the 2 mil Oracal product. There is no need for any surface
prep. Just peel and stick. I have used the same material for hinging and it
works almost as well as the Blenderm tape. I have some beater foamies that
are basically being held togther by the vinyl. This vinyl product bonds very
well to depron.

hope you enjoy the foamie,

dean




--- On Sun, 6/8/08, Jay Marshall <lightfoot at sc.rr.com> wrote:

> From: Jay Marshall <lightfoot at sc.rr.com>
> Subject: [NSRCA-discussion] Vinyl Graphics
> To: nsrca-discussion at lists.nsrca.org
> Date: Sunday, June 8, 2008, 3:53 PM
> This is new to me - vinyl graphics on Depron.  Do they need
> to have the
> edges sealed? With what?
> 
>  
> 
> Jay Marshall_______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion