[NSRCA-discussion] Buddy chord

[Bob Richards]

I found out that if you change models in the master radio, it will turn off the trainer function and you have to re-enable it the next time you buddy-box. However, this does not sound like the problem since it started acting up while flying and not between flights.

Bob R

--- On Tue, 7/8/08, Linda A. Carnes <patternlady at tds.net> wrote:









 Could be the connectors in the Tx’s getting corroded with age or the Trainer switch on the Master is going.
 




 ----- Original Message ----
From: Paul LaChance <plachance at cox.net>





Hi all, 

 

This is off topic, but I had a strange thing happen today.  Was flying with a buddy chord today and the chord slowly quit working until it did not work at all.  Both transmitters are fully charged.  They are both Futaba 8UAP's.  It was working when we put the plane in the air and then it quit.  Any guesses what the problem can be?  It is a new chord too.  Thanks in advance.

 

Paul  
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080708/1ed7a1c9/attachment-0001.html>