[NSRCA-discussion] Buddy chord

[Linda A. Carnes]

 Could be the connectors in the Tx’s getting corroded with age or the
Trainer switch on the Master is going.

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
Sent: Tuesday, July 08, 2008 8:33 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Buddy chord

 

It must be a dissonant chord . . . . .

. . . . . . . better C# or you will B♭

Bob Kane
getterflash at yahoo.com

 

 

----- Original Message ----
From: Paul LaChance <plachance at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Monday, July 7, 2008 10:44:56 PM
Subject: [NSRCA-discussion] Buddy chord

Hi all, 

 

This is off topic, but I had a strange thing happen today.  Was flying with
a buddy chord today and the chord slowly quit working until it did not work
at all.  Both transmitters are fully charged.  They are both Futaba 8UAP's.
It was working when we put the plane in the air and then it quit.  Any
guesses what the problem can be?  It is a new chord too.  Thanks in advance.

 

Paul  

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080708/500ca7cc/attachment.html>