[NSRCA-discussion] YS Help, part II

[William C. Harden]

Excellent!!  Glad you got it off.  

 

Now don't forget to clean up the crankshaft by polishing the area where the
bearing sits.  You'll be glad you did the next time you have to remove a
rear bearing.

 

Bill

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
Sent: Friday, July 04, 2008 7:39 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] YS Help, part II

 

Thanks for all the ideas.  I did get the bearing off, I took a deeper look
at the toolbox and came up with some old truck cap clamps, strong aluminum
"C" shaped pieces the fit nicely in between the crank and bearing race. A
couple of medium taps on the hammer and off it popped.

 

Bob Kane
getterflash at yahoo.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080705/a82f18e5/attachment.html>