[NSRCA-discussion] Incidence Meter

[James Oddino]

John, are you using it in an absolute level manner or are you zeroing  
it on your reference measurement?  If your level read .25 degrees and  
you zero'd it, I would expect to see .5 when you turned it 180.  If it  
read .25 and you didn't zero it, it should read .25 in the other  
direction.
Find something or make something exactly level and repeat the test and  
report back.  it sounds like a great deal.

Jim O


On Jul 3, 2008, at 8:57 AM, John Konneker wrote:

> I just got mine.
> What does yours show when you rotate it 180 degrees?
> In other words you are reading it from the right side of the plane  
> and you turn it to read from the left side.
> Just turning the Wixey device, nothing else.
> Mine shows a .5 degree difference.
> JLK
>
> > Date: Thu, 3 Jul 2008 09:19:35 -0500
> > From: glmiller3 at suddenlink.net
> > To: nsrca-discussion at lists.nsrca.org
> > Subject: [NSRCA-discussion] Incidence Meter
> >
> > Here is a link to my post on RCU regarding the adaptation of the  
> Wixey Inclinometer for use as an incidence meter.
> >
> >
> > http://www.rcuniverse.com/forum/m_7689336/tm.htm
> >
> > Great little doo dad for 40 bucks!
> >
> > G
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080703/40300186/attachment.html>