[NSRCA-discussion] YS 160DZ prop choice?

[Ed Alt]

Nath:

Both of my OS 1.40's, with Aeroslave pipes on 15% nitro turn the 18.1x10
with ease, so the 160 DZ should not have any problem with it. Try it, you
will like it. 

 

Ed

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nath
Sent: Friday, January 25, 2008 6:24 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] YS 160DZ prop choice?

 

Thanks all for the help.

My only worry is that the 18.1x10 is a little much as i'm only running 25%
fuel. I've seen the 18.1x10 on the 170DZ and it sure is awsome but it seemed
to have a fair bit of extra power over the 160.........maybe because it was
using the 18.1x10!!!

One more thing. Is there anywhere from Hong Kong that anyone is buying these
props? I in the land of OZ and am not to sure if APC will ship here.

Thanks heaps

Nath
 

--------- Original Message --------
From: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] YS 160DZ prop choice?
Date: 25/01/2008 03:06



18.1X10 APC..incredible breaking and constant speed.

 

Arch

 

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
adriancwong at earthlink.net
Sent: Thursday, January 24, 2008 12:12 AM
To: Nath; NSRCA Mailing List
Subject: Re: [NSRCA-discussion] YS 160DZ prop choice?

 

I have been using a 17x12w on Cool Power 30% heli with good results. Around
8,100 to 8,200 on the ground, more than enough power. Very smooth tractor
like pull on up lines, and good slow down lines.

As for landing, I use an airbrake condition - about 35 to 40% on up aileron
and between 8 to 10% on down elevator. Even on very gusty cross wind, you
still get good control for landing.

-----Original Message----- 
From: Nath 
Sent: Jan 23, 2008 9:34 PM 
To: NSRCA Mailing List 
Subject: [NSRCA-discussion] YS 160DZ prop choice? 

Hey All,

Just wondering if anyone has any suggestions on prop choice for a YS 160 DZ
along with a theory to match that chioce?

At the moment im running an APC 16x12 pattern, on a VERY slipery F3A model,
i'm really wanting to slow everything down espesially on the down lines and
also want to try to get it to slow for landing as i tend to have a rocket on
my hands at the end of each flight ( i havnt learned to side slip........
yet) but im not to interested in going to a four blader if possible.

Any help would be appreciated

Nath

________________________________________________

This message was sent using Dodo Webmail - www.dodo.com.au

 

  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 



________________________________________________

This message was sent using Dodo Webmail - www.dodo.com.au

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080125/20b92242/attachment.html