[NSRCA-discussion] YS 160DZ prop choice?

[Archie Stafford]

18.1X10 APC..incredible breaking and constant speed.

 

Arch

 

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
adriancwong at earthlink.net
Sent: Thursday, January 24, 2008 12:12 AM
To: Nath; NSRCA Mailing List
Subject: Re: [NSRCA-discussion] YS 160DZ prop choice?

 

I have been using a 17x12w on Cool Power 30% heli with good results. Around
8,100 to 8,200 on the ground, more than enough power. Very smooth tractor
like pull on up lines, and good slow down lines.

As for landing, I use an airbrake condition - about 35 to 40% on up aileron
and between 8 to 10% on down elevator. Even on very gusty cross wind, you
still get good control for landing.



-----Original Message----- 
From: Nath 
Sent: Jan 23, 2008 9:34 PM 
To: NSRCA Mailing List 
Subject: [NSRCA-discussion] YS 160DZ prop choice? 

Hey All,

Just wondering if anyone has any suggestions on prop choice for a YS 160 DZ
along with a theory to match that chioce?

At the moment im running an APC 16x12 pattern, on a VERY slipery F3A model,
i'm really wanting to slow everything down espesially on the down lines and
also want to try to get it to slow for landing as i tend to have a rocket on
my hands at the end of each flight ( i havnt learned to side slip........
yet) but im not to interested in going to a four blader if possible.

Any help would be appreciated

Nath

________________________________________________

This message was sent using Dodo Webmail - www.dodo.com.au



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080124/8e7b6862/attachment.html