[NSRCA-discussion] Ball bearing clevis'

[Mike Hester]

3mm seems to work pretty good....

-Mike

  ----- Original Message ----- 
  From: J N Hiller 
  To: NSRCA Mailing List 
  Sent: Thursday, January 17, 2008 12:10 PM
  Subject: Re: [NSRCA-discussion] Ball bearing clevis'


  I had an aileron 6-32 brake last summer. I now use #8's everywhere.

  Jim Hiller

   

  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of John Pavlick
  Sent: Wednesday, January 16, 2008 10:14 PM
  To: NSRCA Discussion
  Subject: [NSRCA-discussion] Ball bearing clevis'

   

  I'm thinking about using ball-bearing clevis' on a new airplane. What is everyone using for 6-32 bolts through the surface and 4-40 pushrod threads? Also - what's the best thing to use on the control surfaces? 6-32 screws or threaded rod? I remember hearing that one or the other wasn't good because it was too brittle and it could braek.

   

  John Pavlick
  http://www.idseng.com



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080117/56cd9cc7/attachment.html