[NSRCA-discussion] paint

Wed Jan 16 12:23:08 AKST 2008

Hi Mark..

I got it directly from Diversified Solutions.

http://klasskote.com/paint_store.html

The primer to get is #55 part A.

Use the 'white fast' #420 part B.

There is no need to get the reducer from them..you can get bulk lacquer
thinner from a local paint store. I used the cheapest brand I could find.

I use it to clean the spray equipment after shooting the Concept too.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok. 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mark Atwood
Sent: Wednesday, January 16, 2008 2:48 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] paint

Hey Dave,

Where do you get it??     I've been a fan of the PPG K-2 Primer, similar to
the K-36 but instead of grey it's an offwhite, almost light yellow
primer...but white would be even better.

-M

On 1/16/08 3:37 PM, "k6xyz" <k6xyz at sbcglobal.net> wrote:

I like Klass Kote white epoxy primer.
Its fuel proof and sands like old K&B primer.
I've used it a couple of times under PPG Concept..works great.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok. 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]
<mailto:nsrca-discussion-bounces at lists.nsrca.org%5d>  On Behalf Of
ronlock at comcast.net
Sent: Wednesday, January 16, 2008 12:23 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] paint

Ive used the Century 21 white primer in a spray can on fiberglass, the paint
on Vivats, 

and aluminum landing gear, and PPG on top.  Works fine.

Ron Lockhart

-------------- Original message -------------- 
From: "Dave Michael" <davidmichael1 at comcast.net> 

Assuming I want to use white primer and PPG paint, what kind/brand of primer
should I be using?

Dave

----- Original Message ----- 

From: Tony  <mailto:tony at radiosouthrc.com> <mailto:tony at radiosouthrc.com>  

To: 'NSRCA Mailing List'  <mailto:nsrca-discussion at lists.nsrca.org>
<mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Wednesday, January 16, 2008 11:30 AM

Subject: Re: [NSRCA-discussion] paint

The PPG paint doe not really have a shelf life, and I have used some that
was several years old with no problems.  The items that DO have a life are
the activator  (DUs) and to some extent the reducers (DTs)  The test for the
activator is if it is still clear and fluid, us it.  If it has yellowed
and/or gelled, toss it!  The reducers should really last a long time,
provided they are kept air-tight.  

Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
tony at radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]
<mailto:nsrca-discussion-bounces at lists.nsrca.org%5d>  On Behalf Of Ron Van
Putte
Sent: Wednesday, January 16, 2008 11:22 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] paint

I have some PPG paint I bought from my local PPG paint store a couple of
years ago.  Before using it, I wonder if there's a recommended "use by" on
any of the paint elements.

Ron Van Putte

On Jan 15, 2008, at 2:12 PM, Mark Atwood wrote:

Go to the PPG web site  www.ppg.com  <http://www.ppg.com/>
<http://www.ppg.com/>  and find a local autostore that carries their line of
paints.  That's where I've always bought all my supplies. You won't be able
to get as small a supply of colors, but getting pints or quarts of catalyst
or reducer usually isn't a problem.

-Mark

On 1/15/08 3:03 PM, "george w. kennie" <geobet at gis.net> wrote:

Hey Guys,
I just called Radio South to order some catalyst for some Concept paint that
I have left from the last paint project I conducted
and was informed that they no longer carry the line. 
I have quite a bit of color stock and would like to not have to jettison the
lot. Anybody know of a compatible catalyst that will work?
TIA,
G. 

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080116/159f7c62/attachment-0001.html 