[NSRCA-discussion] paint

[Mark Atwood]

Hey Dave,

Where do you get it??     I¹ve been a fan of the PPG K-2 Primer, similar to
the K-36 but instead of grey it¹s an offwhite, almost light yellow
primer...but white would be even better.

-M


On 1/16/08 3:37 PM, "k6xyz" <k6xyz at sbcglobal.net> wrote:

> I like Klass Kote white epoxy primer.
> Its fuel proof and sands like old K&B primer.
> I¹ve used it a couple of times under PPG ConceptŠ.works great.
>  
> 
> Regards
> 
> Dave Harmon
> NSRCA 586
> K6XYZ[at]sbcglobal[dot]net
> Sperry, Ok. 
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
> ronlock at comcast.net
> Sent: Wednesday, January 16, 2008 12:23 PM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] paint
>  
> 
> Ive used the Century 21 white primer in a spray can on fiberglass, the paint
> on Vivats, 
> 
> and aluminum landing gear, and PPG on top.  Works fine.
> 
>  
> 
> Ron Lockhart
> 
>  
>> -------------- Original message --------------
>> From: "Dave Michael" <davidmichael1 at comcast.net>
>> 
>> Assuming I want to use white primer and PPG paint, what kind/brand of primer
>> should I be using?
>> 
>>  
>> 
>> Dave
>>> 
>>> ----- Original Message -----
>>> 
>>> From: Tony <mailto:tony at radiosouthrc.com>
>>> 
>>> To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>
>>> 
>>> Sent: Wednesday, January 16, 2008 11:30 AM
>>> 
>>> Subject: Re: [NSRCA-discussion] paint
>>> 
>>>  
>>> The PPG paint doe not really have a shelf life, and I have used some that
>>> was several years old with no problems.  The items that DO have a life are
>>> the activator  (DUs) and to some extent the reducers (DTs)  The test for the
>>> activator is if it is still clear and fluid, us it.  If it has yellowed
>>> and/or gelled, toss it!  The reducers should really last a long time,
>>> provided they are kept air-tight.
>>>  
>>>  
>>>  
>>> 
>>> Tony Stillman, President
>>> Radio South, Inc.
>>> 139 Altama Connector, Box 322
>>> Brunswick, GA  31525
>>> 1-800-962-7802
>>> tony at radiosouthrc.com
>>> 
>>> 
>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
>>> Sent: Wednesday, January 16, 2008 11:22 AM
>>> To: NSRCA Mailing List
>>> Subject: Re: [NSRCA-discussion] paint
>>>  
>>> I have some PPG paint I bought from my local PPG paint store a couple of
>>> years ago.  Before using it, I wonder if there's a recommended "use by" on
>>> any of the paint elements.
>>> 
>>>  
>>> 
>>> Ron Van Putte
>>> 
>>>  
>>> 
>>> On Jan 15, 2008, at 2:12 PM, Mark Atwood wrote:
>>>  
>>> Go to the PPG web site  www.ppg.com <http://www.ppg.com/>  and find a local
>>> autostore that carries their line of paints.  That¹s where I¹ve always
>>> bought all my supplies. You won¹t be able to get as small a supply of
>>> colors, but getting pints or quarts of catalyst or reducer usually isn¹t a
>>> problem.
>>> 
>>> -Mark
>>> 
>>> 
>>> On 1/15/08 3:03 PM, "george w. kennie" <geobet at gis.net> wrote:
>>> 
>>> 
>>> Hey Guys,
>>> I just called Radio South to order some catalyst for some Concept paint that
>>> I have left from the last paint project I conducted
>>> and was informed that they no longer carry the line.
>>> I have quite a bit of color stock and would like to not have to jettison the
>>> lot. Anybody know of a compatible catalyst that will work?
>>> TIA,
>>> G. 
>>> 
>>> 
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>  
>>> 
>>> _______________________________________________
>>> 
>>> NSRCA-discussion mailing list
>>> 
>>> NSRCA-discussion at lists.nsrca.org
>>> 
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>  
>>> 
>>> 
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080116/d7992749/attachment.html