[NSRCA-discussion] FW: !4 MZ modifications

[Ron Van Putte]

Hmmmm.  I wonder how Keith knows this.  Come clean Keith.  How'd you  
find out?

Inquisitive Ron VP

On Dec 11, 2008, at 3:46 PM, Keith Hoard wrote:

> The old ones are blue and the new ones are white. . . there is a  
> secret code to getting them changed out.  You have to tell them  
> that you're getting intermittent glitches that you can see on the  
> servo screen.
>
> Otherwise they won't change them out until you lose an airplane. . .
>
> On Thu, Dec 11, 2008 at 2:37 PM, John Pavlick <jpavlick at idseng.com>  
> wrote:
> And if they could just tell us exactly what that secret "color" is,  
> we could all look at our radios and figure out if they need to be  
> replaced or not. Almost there...
>
> OK, let's try this:
> Tony - what color are the encoders that you install when you  
> service one of these radios that has "bad" encoders?
>
> John Pavlick
>
> --- On Thu, 12/11/08, Richard Strickland <pamrich47 at hotmail.com>  
> wrote:
> From: Richard Strickland <pamrich47 at hotmail.com>
> Subject: [NSRCA-discussion] FW: !4 MZ modifications
> To: "NSRCA DISCUSSION" <nsrca-discussion at lists.nsrca.org>
> Date: Thursday, December 11, 2008, 6:05 PM
>
> Here's a little more info....
> RS
>
>
> > -----Original Message-----
> > From: support Futaba [mailto:support at hobbico.com]
> > Sent: Thursday, December 11, 2008 10:57 AM
> > To: richard.s at allied-callaway.com
> > Subject: Re: FW: !4 MZ modifications
> >
> >
> > Dear Valued Customer:
> >
> > Thank you for your Email.
> >
> > The stick encoders have been replaced with new ones. The only  
> thing we
> > know is that they are a different color, but the part numbers are  
> the
> > same. The screens are not a "new" type, just replacements for bad
> > ones.
> >
> > We hope you find this information helpful. Should you have any  
> further
> > questions or concerns, please do not hesitate to contact us at this
> > email address. (Please be sure to copy all previous emails into any
> > future questions.)
> >
> > DID YOU KNOW that our web pages now all contain FAQs? (Frequently  
> asked
> > questions) Please drop by and take a look! We hope you'll find the
> > information helpful and valuable to you.
> >
> > Sincerely,
> >
> > Futaba Service Center North America
> > 3002 N. Apollo Dr. Suite 1
> > Champaign IL 61822
> > USA
> >
> > Phone: (217) 398-0007
> > Fax: (217) 398-7721
> > Email: service at futaba-rc.com
> > Web: http://www.futaba-rc.com/index.html
> >
> > >>> "Richard Strickland" <richard.s at allied-callaway.com> 12/11/2008
> > 10:42 AM >>>
> >
> >
> > Have the encoders been changed to a different type or  
> configuation? If
> > so,
> > about when was that change made? Same thing on the screen--are the
> > newer
> > ones different than the older ones? If so, about when was that  
> change
> > made?
> >
> > Thanks,
> >
> > Richard
>
>
> Send e-mail faster without improving your typing skills. Get your  
> Hotmail® account.
> _______________________________________________ NSRCA-discussion  
> mailing list NSRCA-discussion at lists.nsrca.org http:// 
> lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> -- 
>
> Keith Hoard
> Collierville, TN
> khoard at gmail.com
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion