[NSRCA-discussion] FW: !4 MZ modifications

[Keith Hoard]

The old ones are blue and the new ones are white. . . there is a secret code
to getting them changed out.  You have to tell them that you're getting
intermittent glitches that you can see on the servo screen.

Otherwise they won't change them out until you lose an airplane. . .

On Thu, Dec 11, 2008 at 2:37 PM, John Pavlick <jpavlick at idseng.com> wrote:

> And if they could just tell us exactly what that secret "color" is, we
> could all look at our radios and figure out if they need to be replaced or
> not. Almost there...
>
> OK, let's try this:
> Tony - what color are the encoders that you install when you service one of
> these radios that has "bad" encoders?
>
> John Pavlick
>
> --- On *Thu, 12/11/08, Richard Strickland <pamrich47 at hotmail.com>* wrote:
>
> From: Richard Strickland <pamrich47 at hotmail.com>
> Subject: [NSRCA-discussion] FW: !4 MZ modifications
> To: "NSRCA DISCUSSION" <nsrca-discussion at lists.nsrca.org>
> Date: Thursday, December 11, 2008, 6:05 PM
>
>  Here's a *little* more info....
> RS
>
>
> > -----Original Message-----
> > From: support Futaba [mailto:support at hobbico.com]
> > Sent: Thursday, December 11, 2008 10:57 AM
> > To: richard.s at allied-callaway.com
> > Subject: Re: FW: !4 MZ modifications
> >
> >
> > Dear Valued Customer:
> >
> > Thank you for your Email.
> >
> > The stick encoders have been replaced with new ones. The only thing we
> > know is that they are a different color, but the part numbers are the
> > same. The screens are not a "new" type, just replacements for bad
> > ones.
> >
> > We hope you find this information helpful. Should you have any further
> > questions or concerns, please do not hesitate to contact us at this
> > email address. (Please be sure to copy all previous emails into any
> > future questions.)
> >
> > DID YOU KNOW that our web pages now all contain FAQs? (Frequently asked
> > questions) Please drop by and take a look! We hope you'll find the
> > information helpful and valuable to you.
> >
> > Sincerely,
> >
> > Futaba Service Center North America
> > 3002 N. Apollo Dr. Suite 1
> > Champaign IL 61822
> > USA
> >
> > Phone: (217) 398-0007
> > Fax: (217) 398-7721
> > Email: service at futaba-rc.com
> > Web: http://www.futaba-rc.com/index.html
> >
> > >>> "Richard Strickland" <richard.s at allied-callaway.com> 12/11/2008
> > 10:42 AM >>>
> >
> >
> > Have the encoders been changed to a different type or configuation? If
> > so,
> > about when was that change made? Same thing on the screen--are the
> > newer
> > ones different than the older ones? If so, about when was that change
> > made?
> >
> > Thanks,
> >
> > Richard
>
>
> ------------------------------
> Send e-mail faster without improving your typing skills. Get your Hotmail(R)
> account.<http://windowslive.com/Explore/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_speed_122008>
>
> _______________________________________________
> NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 

Keith Hoard
Collierville, TN
khoard at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081211/5dc696af/attachment.html>