[NSRCA-discussion] Source for small extension springs

[Lisa & Larry]

A few years back (2003), Jim H. and Bobby S. from the Chicago group helped
me out with a set of springs in my Stylus. Being new at that time, I believe
Jim did the surgery at the contest.I don't recall where they got the
springs.

 

Larry Diamond

lld613 at psci.net

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
Sent: Monday, August 18, 2008 9:36 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Source for small extension springs

 

I would like to play around with the stick tension on my transmitter. The
stock springs are too soft, even when adjusted to maximum tension. I tried a
set of Radio South springs, but they are slightly too long for my Stylus and
the rate varies quite a bit from the center to the extremes.  I am reluctant
to shorten the spring by cutting off a few coils and re-bending the loop for
fear of fatiguing the metal and suffer a failure in flight.

Does anyone know of a source for these small springs?  Thanks.

 

Bob Kane
getterflash at yahoo.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080818/78dfd502/attachment.html>