[NSRCA-discussion] Covering

[DoWayne Gould]

Ron

I did a waving flag like Stuart on a piece of glass. Iron the seams down
good then apply in one sheet. When shrinking try to stay off the seams the
best you can.

Dowayne

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
ron at inweldcorp.com
Sent: Friday, August 01, 2008 4:21 PM
To: NSRCA
Subject: [NSRCA-discussion] Covering

 

This question is not about pattern planes but I know one of you guys out
there has the answer.  When covering a built up wing (ribs and spars) with
Monokote, how do you change colors over an open area?  Do you tack the whole
pattern together and then apply it as one sheet?  Or can you iron pieces
together on the wing even though there is no balsa to back it up?

 

Ron Needham

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080801/7637b6c8/attachment.html>