[NSRCA-discussion] Aluminum fuel lines

[Dwayne Brown]

Gray, do you have a picture of your Symphony pattern airplane?  Dwayne

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gray E Fowler
Sent: Wednesday, April 16, 2008 8:14 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Aluminum fuel lines

 


Epoxy...NOT 5 or 15 minute.




Gray Fowler
Senior Principal Chemical Engineer
Radomes and Specialty Apertures
Technical Staff Composites Engineering
Raytheon 




John Konneker <jlkonn at hotmail.com> 
Sent by: nsrca-discussion-bounces at lists.f3a.us 

04/16/2008 06:41 AM 


Please respond to
NSRCA Mailing List <nsrca-discussion at lists.f3a.us>


To

Discussion List <nsrca-discussion at lists.f3a.us> 


cc

 


Subject

[NSRCA-discussion] Aluminum fuel lines

 


 

 




I have finally reached the point all the mods I wanted to do to last year's
Focus are complete.
Now the reassembly.
In one of many attempts to reduce the planes weight I want to shorten my
fuel lines by moving my fuel dots and also by substituting
aluminum tubing for fuel line where I can on the long runs.  What's the best
way to anchor the aluminum?  Glue balsa standoff blocks to the
fuse sides and run the tubing through the blocks?  What kind of adhesive
will hold the best since I am sure some small amount of surface
oxidation will occur causing some glues to work better than others.
Thanks!
JLK_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080416/6b63d7ef/attachment.html