[NSRCA-discussion] 2M Pattern Plane For Sale

[Lisa & Larry]

Ron,

 

By chance do you know the type of Rx battery you had in this plane?

 

Is there an easy way to replace it? It is on the floor, epoxy'd to the
bottom of the fuse about 6 to 8 inches from the wing tube. Very difficult to
get to.

 

It's been hanging like a bat since we bought it. I finally sold my other 2M
plane, so this back up move t the primary plane.

 

I have no problem cycling the battery to determine if it's still good. Just
need to know the NiMH or NiCd and what capacity..

 

Thanks,

 

Larry Diamond

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
ronclark51 at comcast.net
Sent: Thursday, March 30, 2006 6:15 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] 2M Pattern Plane For Sale

 

 

TITAN 2M pattern plane. This is a wood prototype, of the kit sold by PAC.
Scott Dunphy designed and co-built by Scott and myself. I flew this plane
for a year, three years ago in Masters and FAI. It flys great. Weighs 10.25
lbs. It is set up for a YS with a CF nose ring and a Hyde clone mount. It
has fixed gear, plug in wings, fixed stab, pull-pull on rud. and elev.
Covered with red, yellow and purple mono-kote.

Plane bare- $350.00

W/ servos Rud. JR DS8411, Elev. JR DS 8231, and two Futaba S9150s on
Ailerons add $150.00

E-Mail  <mailto:ronclark51 at comcast.net> ronclark51 at comcast.net for pictures

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080412/3eb28e93/attachment.html