[NSRCA-discussion] YS 170 Break in Procedure

[colin chariandy]

Hi all
   
  The weather is finally good enough to start flying in Ontario so I would like to fire up the YS. It's been a while since last I ran one and would prefer not to screw up the nice new motor.
   
  I'm running the Hatori muffler/header and the engine in mounted using a Hyde 170ARA. Of course I'll use 30% Heli fuel, 16.5 to 17-12 APC and a "soft start" glow igniter.
   
  Any advice on the best way to run-in these things? Should I run it in while mounted in the plane, or would that be too much for airframe?
   
  Thanks
  Colin.

       
---------------------------------
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080407/42f2e60e/attachment.html