[NSRCA-discussion] Off Topic - Need Help
Matthew Frederick
mjfrederick at cox.net
Sun Apr 6 20:28:14 AKDT 2008
Divining works very well Ron. I know how crazy it sounds, but the coat
hangar trick does work. I usually use 2, one in each hand, held loosely. As
you walk over the pipe, they will cross over each other.
Matt
----- Original Message -----
From: "Ron Van Putte" <vanputte at cox.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, April 06, 2008 5:13 PM
Subject: Re: [NSRCA-discussion] Off Topic - Need Help
> The location is up in the foothills of the Smoky Mountains in
> southwest Georgia. The well services a group of about twenty cabins
> and the pipes were installed in about 1977. We want to install a
> cutoff valve in a 4" PVC pipe about 100 yards from the well, but want
> to minimize the digging to find the pipe. I can't find any record of
> how the pipes were installed; no layout plan. I think the pipes were
> privately installed, so no local utilities were involved.
>
> I don't mean to impose on the Discussion List to solve the problem,
> but I thought someone might be able to save me some time and energy.
>
> Ron Van Putte
>
> On Apr 6, 2008, at 3:20 PM, rj520 at aol.com wrote:
>
>> Try your local utilities locate phone #. They seem to be able to
>> find just about anything.
>>
>> Randy Johnston
>>
>
>
> ----- Original Message -----
> From: "Ron Van Putte" <vanputte at cox.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Sunday, April 06, 2008 3:04 PM
> Subject: [NSRCA-discussion] Off Topic - Need Help
>
>
>
>> I am trying to trace the route of a 4" PVC water pipe about 100 yards
>> from a well. The pipe is buried about 12" to 14" underground. I
>> think it goes fairly straight. I don't want to dig down to find the
>> pipe until I'm sure where it is, because the soil is VERY difficult
>> to dig in, due to lots of gravel and clay. Although I'm sure there
>> are instruments which will enable one to trace the route of the pipe,
>> I don't have a clue who to ask. Any help available out there?
>>
>> Ron Van Putte
>>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list