[NSRCA-discussion] Method of mounting wheel pants

[Dennis Cone]

Because of this mounting method, Rex has not been able to get his pants off
for years.

 

DC

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Rex
Sent: Wednesday, April 02, 2008 6:55 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Method of mounting wheel pants

 

John
 
I just glue mine together...   If you break the wheel pant, just grind the
remainder off and glue another set
on...  Pretty simple.  I usually use epoxy, but the last set, I used Elmer's
Ultimate Glue (Probond).  I use the 
lightweight aluminum axles from Central, drill the leg and pant... assemble
the parts with glue between the 
pant and gear leg.  After I adjust the attitude of the pant, I simply
tighten the axle bolt and let it dry.  You 
cant get any lighter than that!  I've been doing this for years, and haven't
had any problems.
 
Rex





  _____  

From: jpavlick at idseng.com
To: nsrca-discussion at lists.nsrca.org
Date: Wed, 2 Apr 2008 20:33:17 -0400
Subject: [NSRCA-discussion] Method of mounting wheel pants

I'm looking for a light, reliable method to mount wheels and wheel pants on
carbon fiber landing gear legs. Any suggestions?

 

John Pavlick
http://www.idseng.com <http://www.idseng.com/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080403/a51b257c/attachment.html