[NSRCA-discussion] Method of mounting wheel pants

[Pete Cosky]

I usually put a piece of 1/16" ply on the pant mounting area and then pinch the pant between the axle nut and the gear leg and then use a cut off servo screw from the back side of the gear leg into the back of the pant as an anti-rotation pin.
  ----- Original Message ----- 
  From: John Pavlick 
  To: NSRCA Discussion 
  Sent: Wednesday, April 02, 2008 8:33 PM
  Subject: [NSRCA-discussion] Method of mounting wheel pants


  I'm looking for a light, reliable method to mount wheels and wheel pants on carbon fiber landing gear legs. Any suggestions?

  John Pavlick
  http://www.idseng.com


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080403/71027eed/attachment.html