[NSRCA-discussion] Question about Hyde ARIA Mount for YS110

[Richard Lewis]

6 minutes.what took you so long.VBG.Thanks Jason

 

Richard

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of JShulman
Sent: Monday, September 17, 2007 9:18 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Question about Hyde ARIA Mount for YS110

 

The 1/4" bolt hole if for centering in the firewall. The standard 4 bolts,
plus the 2 center ones are the actually final mounting bolt holes.

 

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard Lewis
Sent: Monday, September 17, 2007 9:12 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] Question about Hyde ARIA Mount for YS110

I have a Hyde ARIA mount that I got with no instructions.  There are is a
normal 4 hole pattern in the backplate, two centered holes that pass through
the aluminum nose ring support, and a single hole in the center that appears
to be tapped for 1/4x20.  What is standard mounting procedure for this
mount?

 

Richard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070918/2232da93/attachment.html