[NSRCA-discussion] Question about Hyde ARIA Mount for YS110

[JShulman]

The 1/4" bolt hole if for centering in the firewall. The standard 4 bolts,
plus the 2 center ones are the actually final mounting bolt holes.

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard Lewis
  Sent: Monday, September 17, 2007 9:12 PM
  To: 'NSRCA Mailing List'
  Subject: [NSRCA-discussion] Question about Hyde ARIA Mount for YS110


  I have a Hyde ARIA mount that I got with no instructions.  There are is a
normal 4 hole pattern in the backplate, two centered holes that pass through
the aluminum nose ring support, and a single hole in the center that appears
to be tapped for 1/4x20.  What is standard mounting procedure for this
mount?



  Richard

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.487 / Virus Database: 269.13.22/1013 - Release Date: 9/17/2007
1:29 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070918/5bca87e9/attachment.html