[NSRCA-discussion] Question about Hyde ARIA Mount for YS110

[Richard Lewis]

Sorry, can't get on that bandwagon with you. :)

 

Mine was second hand, no fault of Central Hobbies or Merle Hyde.

 

Richard

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of DwayneNancy
Sent: Monday, September 17, 2007 9:34 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Question about Hyde ARIA Mount for YS110

 

I've got a Hyde mount too w/o any instructions.  I've been in contact with
Central Hobbies but all I get there is a the run around.  I guess they think
anyone should be smart enough to figure the mounting procedure.  Let me know
if you get any instructions.  Mine is for a YS 1.20.  It has a nose ring too
but I don't know the mount designation or p/n.  Dwayne

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Richard Lewis
Sent: Monday, September 17, 2007 9:12 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] Question about Hyde ARIA Mount for YS110

 

I have a Hyde ARIA mount that I got with no instructions.  There are is a
normal 4 hole pattern in the backplate, two centered holes that pass through
the aluminum nose ring support, and a single hole in the center that appears
to be tapped for 1/4x20.  What is standard mounting procedure for this
mount?

 

Richard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070918/cb3eafb7/attachment.html