[NSRCA-discussion] What mount for YS160/170

[colin chariandy]

YS160/170...not OS.
   
  I have been flying the OS140/Aeroslave at Masters level for some time now and find the YS considerably easier to manage speed.
   
  Colin.

CHV69 at aol.com wrote:
        In a message dated 9/10/2007 5:34:47 P.M. Eastern Daylight Time, cchariandy at yahoo.ca writes:
    I have no experience running the 160 and am getting an Integral preped for next season. There are quite a few Hyde mounts in a wide range of prices and weights ranging from the light and cheap (Type CR, 3oz, $55) to the heavy and expensive (HCMY16ARIA, 4.9oz, $228). 
   
  I plan on installing a nose ring and I hate seeing the Engine rocking back and forth in the cowl at idle.
   
  Can you advise on a sensible choice?
   
  Another way of asking this would be...whats the least expensive mount that does the job?

  
  I used the Hyde ARI for both my integrals. I run OS 1.40 RX in each. They are aluminum weigh 4.7 oz have the built in nose ring. I have absolutely no rocking of the engine at idle. Vibration is extremely low as well.
   
  Others have used Budd mounts with good success as well. I am not sure Budd makes one for a 1.60.
   
  Why are you going to use a OS 1.60 instead of an OS 1.40 RX?
   
  Carl
   



    
---------------------------------
  See what's new at AOL.com and Make AOL Your Homepage.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

       
---------------------------------
Ask a question on any topic and get answers from real people. Go to Yahoo! Answers. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070910/690d4255/attachment.html