[NSRCA-discussion] header help

[Courtney, Gary Ray]

Cd on the silhouette, hatori on the agressor.



gary 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Woodward,
Jim
Sent: Wednesday, September 05, 2007 6:49 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] header help

Gary - what are you using now?  Years ago Lamar was selling the CD
header which was pretty much bullet proof, and as of late I've been
using the Hatori rigid headers Central is selling.

Thanks,
Jim W.




 
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and may contain
confidential and proprietary information.  Any unauthorized review, use,
disclosure or distribution is prohibited.  If you are not the intended
recipient(s), please contact the sender by reply e-mail and destroy all
copies of the original message.
 
-----Original Message-----

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Courtney,
Gary Ray
Sent: Wednesday, September 05, 2007 5:09 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] header help

The nmp header breaks!!!!! I have 5 sitting in my crap drawer, all had
the brace!!! Not everyone has problems with them but I sure did. I think
the problem with the header is the tubing is to thin, when bent tubing
stretches, it ends up to thin and eventually breaks in the radius of the
bend. The cure could be a thicker wall tubing not a brace. The brace is
a crutch for the underlying problem. My advice is if you are going to
use one buy a spare!!! 


gary

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
plachance at cox.net
Sent: Tuesday, September 04, 2007 8:56 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] header help

Wow,

That is the same 90's header I am running on my 140L.  I am also looking
for a new header for when it fails and when I get a second plane in the
air.  Did your friend have the header brace on when the failure
happened?  I am using the header brace and it seems to hold up very
well.  

Paul LaChance
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion