[NSRCA-discussion] Aileron Servos

[Pete Cosky]

Aileron ServoesJason,

I should have quoted this part of Mike's e-mail; "but the elevator usage you have to replace the gears pretty often".

I am putting 9650s in my Black Magics on elevator, but I could switch to DEPS if need be.

Any thoughts Jason?

Pete
  ----- Original Message ----- 
  From: JShulman 
  To: NSRCA Mailing List 
  Sent: Thursday, October 18, 2007 8:05 PM
  Subject: Re: [NSRCA-discussion] Aileron Servos


  Pete... how are you using DEPS on the ailerons? ;)

  Having flown the same design, 1 plane with 9650's on ailerons and the other with 9151's, I can say that for FAI, at least the 05 stuff, the 9650 was not equal to the 9151 in performance. I noticed a difference in some of the rolls, and all of the snaps. Ailerons are just too large on the 2M planes for the mid sized servos.

  Now for the elevators, they are perfect (if not using the DEPS).
  Regards,
  Jason
  www.jasonshulman.com
  www.shulmanaviation.com
  www.composite-arf.com 

    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Pete Cosky
    Sent: Thursday, October 18, 2007 4:39 PM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] Aileron Servoes


    Are telling me I should use a DEPS system instead of my 9650s in my two V2s?
      ----- Original Message ----- 
      From: Mike Hester 
      To: NSRCA Mailing List 
      Sent: Thursday, October 18, 2007 12:22 PM
      Subject: Re: [NSRCA-discussion] Aileron Servoes


      My opinion:

      Might be ok for electric, it's probably borderline for a 4 stroke. Those servos have some slop in them when they're brand new, and they get bad fast. They work very well for elevator and throttle servos, but the elevator usage you have to replace the gears pretty often. It's not too difficult and the gears are cheap.

      As for ailerons....well, I still like the JR 9411SA the best. Trouble is they're always out of stock!

      -Mike

        ----- Original Message ----- 
        From: Gene Maurice 
        To: 'NSRCA Mailing List' 
        Sent: Thursday, October 18, 2007 11:59 AM
        Subject: [NSRCA-discussion] Aileron Servoes


        Does anyone have any experience with the Futaba s9650 servos on ailerons?? The specs look good, .11 sec. / 62.5 oz./in. @6.0v and only .9 oz. for $50. I'm a die hard JR servo fan but like I said, the spec and price look pretty good. 



------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071019/75505a0a/attachment.html