[NSRCA-discussion] Connectors - Electric
Earl Haury
ejhaury at comcast.net
Mon Oct 15 10:38:23 AKDT 2007
Right - no problem removing the plating where the wire will be soldered (Use a good solder with a little silver in it - I like Deans racing solder). The gold plating prevents oxidation (which is resistive) on the connecting surfaces.
Earl
----- Original Message -----
From: brian young
To: NSRCA Mailing List
Sent: Monday, October 15, 2007 1:13 PM
Subject: Re: [NSRCA-discussion] Connectors - Electric
These 3.5mm plugs are gold plated, my wire wont fit the socket. But I hate to drill them open since they are plated, but the base is copper I assume so does it make any difference as they are getting soldered anyway?
Brian
Earl Haury <ejhaury at comcast.net> wrote:
Jason
The Hacker Comp plugs (female for ESC to match those provided on motor) are 3.5mm. Jeti 3.5mm from Esprit work. If you don't mind changing the motor side, others will work too. Drilling the wire side deeper and cutting off the excess can save weight.
Earl
----- Original Message -----
From: JShulman
To: NSRCA Mailing List
Sent: Monday, October 15, 2007 12:02 PM
Subject: Re: [NSRCA-discussion] Connectors - Electric
Anyone know what connectors are used on the Hacker C-50 set-ups? They look like the 4mm plugs on the Neu site, just wondering if anyone knew for sure.
Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Dave
Sent: Monday, October 15, 2007 11:53 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Connectors - Electric
http://www.neumotors.com/20061222/Connectors.html
These might work for you as well.
Dave
------------------------------------------------------------------------
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Keith Black
Sent: Monday, October 15, 2007 10:42 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Connectors - Electric
Brian, those are really sweet connectors. Let me know if you find a supply.
Keith
----- Original Message -----
From: brian young
To: NSRCA Mailing List
Sent: Monday, October 15, 2007 8:18 AM
Subject: [NSRCA-discussion] Connectors - Electric
Im trying to find MP Jet 3.5mm that accept 3.5mm wire (11ga) to fit my batteries. Anyone have any source on these in the US?
http://www.mpjet.com/news/index.php?option=com_wrapper&Itemid=28
Deans are an option I guess but would prefer the bullets.
(As a side note I have some 3.5mm MP Jets that accept 2.5 mm (14Ga) wire if anyone wants some.)
Brian
----------------------------------------------------------------------
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
----------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
--------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
------------------------------------------------------------------------------
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071015/de262d0b/attachment.html
More information about the NSRCA-discussion
mailing list