[NSRCA-discussion] Woodworking podcasts

[J N Hiller]

I knew I saw that somewhere before. This was it. Nice project. Nice work. I
will be following it.
I am getting by with a solid core door blank but often thought about
replacing it with a 4" foam core / hardboard or melamine sandwich. A trim
cut using long straight edges and hot wire should true the top surface
before adding the top skin. Maybe I will add it to my winter project list.
Jim Hiller

 -----Original Message-----
From: 	nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]  On Behalf Of Kelly Regan
Sent:	Friday, November 30, 2007 4:37 PM
To:	NSRCA Mailing List
Subject:	Re: [NSRCA-discussion] Woodworking podcasts

Here is the link to the build:
http://www.rcuniverse.com/forum/m_6437950/tm.htm
I designed adjustable incidence into the 40% for grins.


Kelly Regan wrote:
> That is to funny.....
> I built that table for my first Carden 40% build.
> I am doing a build thread on RCU and the first page shows
> pictures of the table construction.
>
>


--
________________________________
Kelly Regan
Home Page: www.reganspace.com
________________________________

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion