[NSRCA-discussion] Epoxy Question

[Matthew Frederick]

Re: [NSRCA-discussion] Epoxy QuestionOK, Nat, we all know your penchant for details like that, but we already established that we were going with 1oz by mass, not volume. I still say it ends up weighing slightly more than the original 1 oz. The problem is that the finished weight ends up different depending on the surface area exposed to air and the degree to which the solution was mixed prior to allowing it to rest (like the difference between freshly-drawn milk and homogenized milk). Also, apparently alcohol has the ability to bind with some of the chemical bonds within epoxy changing its molecular structure and causing undesirable results... Bottom line to me: find a better way to spread epoxy, don't bother thinning it...

Matt
  ----- Original Message ----- 
  From: Nat Penton 
  To: NSRCA Mailing List 
  Sent: Tuesday, November 20, 2007 7:44 PM
  Subject: Re: [NSRCA-discussion] Epoxy Question


  One fluid ounce of EZ LAM epoxy ( ACP ) weighs very close to 1 1/8 oz
    ----- Original Message ----- 
    From: Michael Ramsey 
    To: NSRCA Mailing List 
    Sent: Tuesday, November 20, 2007 8:10 AM
    Subject: Re: [NSRCA-discussion] Epoxy Question


    How much does one fluid ounce of what type of epoxy weigh?

    Michael...



----------------------------------------------------------------------------
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mark Atwood
    Sent: Tuesday, November 20, 2007 9:09 AM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] Epoxy Question


    Is there ANYONE on the list that's not waiting for Gray's reply to this with eager anticipation of voluminous wisdom, insight and experience??  I think not....

    -M   :):):):):)


    On 11/20/07 8:53 AM, "Don Ramsey" <don.ramsey at suddenlink.net> wrote:


      Breaking news.  Here's something from Mike Harrison that will be of interest to the list.
      Don
       
       
      Ok, think about this, take 1 oz epoxy and thin with 1 oz alcohol (91%).?  After curing how much do you think it weighs and tell me why.

      Mike


--------------------------------------------------------------------------
      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071121/da4c9a56/attachment.html