[NSRCA-discussion] Perry Pump installatin

[R. LIPRIE]

Hey Mike how much do your Black Magic's cost?

Matt
  ----- Original Message ----- 
  From: Mike Hester 
  To: NSRCA Mailing List 
  Sent: Friday, May 25, 2007 12:40 PM
  Subject: Re: [NSRCA-discussion] Perry Pump installatin


  Hi Rick,

  I'm sure Jon will chime in at some point as he's the OS 160 guru....

  What I did was made a bracket out of a piece of aluminum angle, with the adjustable set screw facing a cut out in the side of the cowl. It was mounted on the firewall down low. It will only go one way, because of the little vent hole thingy (if it matters?)

  Anyway, that's what I did way back when...

  -Mike

    ----- Original Message ----- 
    From: Rick Rosinski 
    To: nsrca-discussion at lists.nsrca.org 
    Sent: Friday, May 25, 2007 1:16 PM
    Subject: [NSRCA-discussion] Perry Pump installatin


    I'm just about to finish my second Black Magic and I'm going to try the OS 1.60 for power.  I've looked over the 1.60 cookbook that was in the K factor.  My question is how are you guys mounting the perry pump in the airplane.  The pump came with a mounting bracket, but I'm not confident that it'll hold up to the vibration for long.  Any help is much appreciated.

    Rick




----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition. 
  Version: 7.5.472 / Virus Database: 269.8.0/818 - Release Date: 5/25/2007 12:32 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070525/eece8240/attachment.html