[NSRCA-discussion] Perry Pump installatin

[Mike Hester]

Hi Rick,

I'm sure Jon will chime in at some point as he's the OS 160 guru....

What I did was made a bracket out of a piece of aluminum angle, with the adjustable set screw facing a cut out in the side of the cowl. It was mounted on the firewall down low. It will only go one way, because of the little vent hole thingy (if it matters?)

Anyway, that's what I did way back when...

-Mike

  ----- Original Message ----- 
  From: Rick Rosinski 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Friday, May 25, 2007 1:16 PM
  Subject: [NSRCA-discussion] Perry Pump installatin


  I'm just about to finish my second Black Magic and I'm going to try the OS 1.60 for power.  I've looked over the 1.60 cookbook that was in the K factor.  My question is how are you guys mounting the perry pump in the airplane.  The pump came with a mounting bracket, but I'm not confident that it'll hold up to the vibration for long.  Any help is much appreciated.

  Rick




------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070525/4bf8898e/attachment.html