[NSRCA-discussion] valve clearance

[Ihncheol Park]

Gerald,
   
  Almost all 4-stroke engines have the same valve clearance.
  YS recommends 0.04mm ~ 0.1mm  
  I usually set them at 0.07mm
   
  Hope this helps,
   
  Ihncheol Park

Gerald Gallagher <ggall at bellsouth.net> wrote:
       Looking for the valve clearance on the YS63.
   Thanks 
   
    Jerry Gallagher
   

   
  
 
  
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070330/6aa7c729/attachment.html