[NSRCA-discussion] Starter

[Richard Strickland]

I think some of the starter's power is governed by what battery is behind
it.  I've been using an old Sullivan for eons and with a light ni-cad pack
it would hardly get out of its own way--strapped to a gel-cell, it has
started everything up to a and including a 2C 1.70 with relative ease.

RS


  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Pete Cosky
  Sent: Tuesday, March 27, 2007 9:45 AM
  To: NSRCA Mailing List
  Subject: Re: [NSRCA-discussion] Starter


  Ron Van Putte turned me on to a Maxx Prod starter a few years ago to
replace my Sullivan. It has turned over everything I've put it on up to a
1.60 DZ.

  E-mail Ron and ask him about them.
    ----- Original Message -----
    From: Jay Marshall
    To: NSRCA
    Sent: Tuesday, March 27, 2007 10:39
    Subject: [NSRCA-discussion] Starter


    I need to replace a starter. It will be used on an OS 140RX, among
others. Any suggestions? I looked at a K.... but it said .60 2cy. If you
don't want to endorse products on the 'net then please email me direct.



    Jay Marshall





----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070327/62e3ac31/attachment-0001.html