[NSRCA-discussion] JR Elevator servo gears

Adam Glatt adam.g at sasktel.net
Wed Mar 14 20:12:18 AKDT 2007


Dave, have you tried the DS9000S ? It's a very high-spec full-size 
servo. The main issue may be whether you can make it nylon.
-Adam

DaveL322 at comcast.net wrote:
> Vincente,
> The 8411, 8411sa, and 8231 use the same gear ratio. If you buy the 
> 8411sa gearset, it includes a metal output gear (more expensive) 
> whereas the 8231 is all nylon (cheaper).
> Dave
>
>     -------------- Original message --------------
>     From: vicenterc at comcast.net
>     What is the difference between the 8231 (that Dave Lockhart
>     mentioned before) and the 8411SA gears? Probably they are the same.
>     Thanks,
>     --
>     Vicente "Vince" Bortone
>
>         -------------- Original message --------------
>         From: jonlowe at aol.com
>
>         > DS8417. Real fast. If you don't like metal gears, you can
>         substitute
>         > the two center plastic gears from the 8411SA. Slows it
>         slightly, but
>         > still very fast.
>         >
>         > Jon
>         >
>         > -----Original Message-----
>         > From: vicenterc at comcast.net
>         > To: nsrca-discussion at lists.nsrca.org;
>         nsrca-discussion at lists.nsrca.org
>         > Sent: Wed, 14 Mar 2007 4:16 PM
>         > Subject: Re: [NSRCA-discussion] (no subject)
>         >
>         > What about team JR. I guess that I do not want to start a
>         brand war
>         > but is going to happen anyway.
>         > Â
>         > --
>         > Vicente "Vince" Bortone
>         > Â
>         > -------------- Original message --------------
>         > From: "Archie Stafford"
>         > Vince,
>         >
>         > Â
>         >
>         > I fle! ! w the D EPS system the last couple of years in my
>         Mantis in
>         > Masters. I flew Futaba’s 9254 heli tail rotor servo on
>         the elevator
>         > and LOVED it. Not a lot of torque, only 50+oz, but
>         lightning quick.Â
>         > CPLR flew this servo at the 2005 worlds and I tried it and
>         if I was
>         > going to run one servo again, that is the way I would go.Â
>         Was great
>         > for snaps because of the speed. The servo literally was
>         fast enough
>         > that if you threw the sticks to the corners you still saw a
>         break.
>         >  Prior to that I ran a 9252 servo and I’m sure a lot of
>         guys are
>         > running that setup with Futaba now. For me though, I would
>         stay with
>         > the 9254. For pattern we don’t need the torque on the
>         elevator that a
>         > lot of guys are running,
>         >
>         > Â
>         >
>         > Arch Stafford
>         >
>         > Team Futaba
>         >
>         > Â
>         >
>         > --------
>         >
>         > From: nsrca-discussion-bounces at lists.nsrca.org & ! gt; [ma
>         ilto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
>         > vicenterc at comcast.net
>         > Sent: Wednesday, March 14, 2007 4:00 PM
>         > To: NSRCA
>         > Subject: [NSRCA-discussion] (no subject)
>         >
>         >
>         > Â
>         >
>         > Hello all,
>         >
>         >
>         > Â
>         >
>         >
>         > I would like to get suggestions in regard elevator servos.Â
>         Â I am
>         > planing to use one servo with the Central Hobbies DEPS
>         system that has
>         > been working well for me. I fly Masters.
>         >
>         >
>         > Â
>         >
>         >
>         > Thanks,
>         >
>         >
>         > Â
>         >
>         >
>         > --
>         > Vicente "Vince" Bortone
>         >
>         >
>         >
>         > Â
>         >
>         >
>         >
>         >
>         > Attached Message
>         > From:rcpattern at stx.rr.com
>         > To:nsrca-discussion at lists.nsrca.org
>         > Subject:Re: [NSRCA-discussion] (no subject)
>         > Date:Wed, 14 Mar 2007 4:08 PM
>         >
>         > ____________! _______ ___! _______ __________________
>         > NSRCA-discussion mailing list
>         > NSRCA-discussion at lists.nsrca.org
>         > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>         >
>         >
>         > _______________________________________________
>         > NSRCA-discussion mailing list
>         > NSRCA-discussion at lists.nsrca.org
>         > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>         >
>         >
>         ________________________________________________________________________
>
>         > AOL now offers free email to everyone. Find out more about
>         what's free
>         > from AOL at AOL.com.
>         > =0
>         > _______________________________________________
>         > NSRCA-discussion mailing list
>         > NSRCA-discussion at lists.nsrca.org
>         http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>
>
> ------------------------------------------------------------------------
>
> Subject:
> [NSRCA-discussion] JR Elevator servo gears
> From:
> vicenterc at comcast.net
> Date:
> Thu, 15 Mar 2007 01:28:33 +0000
> To:
> NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>, 
> nsrca-discussion at lists.nsrca.org
>
> To:
> NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>, 
> nsrca-discussion at lists.nsrca.org
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>   


More information about the NSRCA-discussion mailing list