[NSRCA-discussion] YS1.40FZ Prop Size for a Focus

[Bob Kane]

Can you decribe the symptoms?  One issue I am aware of is a bad finish in the bore of the pump regulator. The plunger gets stuck and too much fuel gets pumped into the engine. 

 
Bob Kane
getterflash at yahoo.com



----- Original Message ----
From: twtaylor <twtaylor at ftc-i.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Monday, March 12, 2007 10:11:25 AM
Subject: Re: [NSRCA-discussion] YS1.40FZ Prop Size for a Focus


Because the 1.60 is headed back to YS service yet again. One short flight after the last trip out there. I’ve never had problems with YS engines before this one. Spent 2 hrs yesterday trying to get it to run.
 



From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave Burton
Sent: Monday, March 12, 2007 10:06 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] YS1.40FZ Prop Size for a Focus
 
Why?????
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of twtaylor
Sent: Monday, March 12, 2007 9:52 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] YS1.40FZ Prop Size for a Focus
I am changing the YS1.60 in my Focus to OFB’s YS1.40FZ and was wondering if anyone had an idea what the best prop was? Using CP 30% heli fuel.
 
 
BTW I got the landing gear as well






  J
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



 
____________________________________________________________________________________
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
http://answers.yahoo.com/dir/?link=list&sid=396546091
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070312/d924435a/attachment.html