[NSRCA-discussion] YS-160 setting

[Michael Wickizer]

We have run three of the 160's here in the Texas gulf coast area.  All ended 
up about 1 1/8 on the high end and the pump/regulator about 1/2 to 3/4 out 
from flush. My bet is that you can lean the regulator and get better 
performance and economy.


>From: "JShulman" <jshulman at cfl.rr.com>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
>Subject: [NSRCA-discussion] YS-160 setting
>Date: Thu, 8 Mar 2007 19:06:30 -0500
>
>Hi all,
>
>I've got my friends DZ and the high end needle is 1 1/8 turns out. The reg
>is somewhere around flush. It smokes and bunch, smooth transition, but 
>20ozs
>in less than 8 minutes if I'm not careful. I remember hearing (being told)
>that there is a less consuming set-up that I haven't done yet. Anyone know
>what it is? Gonna fly again tomorrow and try it. Thanks.
>
>Regards,
>Jason
>www.jasonshulman.com
>www.shulmanaviation.com
>www.composite-arf.com
>--
>No virus found in this outgoing message.
>Checked by AVG Free Edition.
>Version: 7.5.446 / Virus Database: 268.18.8/714 - Release Date: 3/8/2007
>10:58 AM
>
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion