[NSRCA-discussion] OS 1.40 Case

[Ron Lockhart]

While on that subject, I'd be interested in a case, with good screws, retapped is OK if working well.
Or if anyone has a solution to an 8-32 tap broken in exhaust port threads?

Reply off list is good.
Later, Ron Lockhart
  ----- Original Message ----- 
  From: Ken Velez 
  To: NSRCA Mailing List 
  Sent: Saturday, June 16, 2007 11:13 PM
  Subject: [NSRCA-discussion] OS 1.40 Case


  Hi all,

  I'm looking for an OS 1.40 RX case with the exaust port screws treads in original condition (not taped) or a parts engine with a good case or a used engine. Please reply off list.

  Thanks,

  Ken
  kvelez at comcast.net




------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070617/5453f69a/attachment.html