[NSRCA-discussion] Masters humpty

[Don Ramsey]

All options can be done.  You can either push or pull over the top.  The 
only requirement is to exit inverted.

Don

----- Original Message ----- 
From: "Verne Koester" <verne at twmi.rr.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, June 03, 2007 11:36 AM
Subject: Re: [NSRCA-discussion] Masters humpty


> You can do it either way as long as you have the half roll on the way up
> (I'm ignoring the 1/4-roll cross-box option at this point). You start from
> inverted then push to vertical. On the way up, you half roll. The top of 
> the
> plane is now facing you. You can push over the top and then push again for
> the required inverted exit. Or you can pull through the top and then push
> through the required inverted exit.
>
> Verne
>
>
> ----- Original Message ----- 
> From: "Steven Maxwell" <patternrules at hotmail.com>
> To: <nsrca-discussion at lists.nsrca.org>
> Sent: Sunday, June 03, 2007 8:40 AM
> Subject: [NSRCA-discussion] Masters humpty
>
>
>> Figured this would be a good time to make sure some things are right, at 
>> a
>> contest this weekend it was brought up that the humpty with options,
>> because
>> of the experiments with the smaller battery for electric I've been doing
>> this in a shorted box after the six sided loop go vertical do a 1/2 roll
>> and
>> then either push or pull to get back to the square horizonal 8, someone
>> mentioned that the power point only showed a cross box or push,pull,push,
>> but if it has options it could be done as a push,push,push, unlike the
>> first
>> humpty with the full roll up which calls for a push,pull,pull.
>>
>> Steve Maxwell
>>
>> _________________________________________________________________
>> PC Magazine's 2007 editors' choice for best Web mail-award-winning 
>> Windows
>> Live Hotmail.
>> http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_pcmag_0507
>>
>>
>
>
> --------------------------------------------------------------------------------
>
>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion