[NSRCA-discussion] YS fuel

[Ron Van Putte]

That's correct.  Morgan Pro Pattern 25% has 100% synthetic oil.  I've  
been using it in YS engines for as long as it has been available.

Ron Van Putte

On Jul 1, 2007, at 10:01 AM, vicenterc at comcast.net wrote:

> Ron,
>
> I assume that the Morgan Pro Pattern is 100% synthetic.  I believe  
> that YS does not want you to use castor oil (or low castor  
> content).  There is some information in the manual in this regard.
>
> --
> Vicente "Vince" Bortone
>
> -------------- Original message --------------
> From: Ron Van Putte <vanputte at cox.net>
> Get ready for some widely varying answers. However, engine fuel is  
> like religion to some people and they won't tolerate any contrary  
> opinions. My fuel (religion) for 4-strokes and 2-strokes is Morgan  
> Pro Pattern 25%.
>
> Ron Van Putte
>
> On Jul 1, 2007, at 10:34 AM, <ron at inweldcorp.com> wrote:
>
>> I am just getting started in pattern. I am building an Oxalys 50  
>> and using a YS63S engine. This is my first four stroke engine and  
>> I am not sure what fuel to use. I figure some of you guys and your  
>> infinite YS experience could give me a suggestion or two.
>>
>>
>> Thanks,
>>
>>
>> Ron Needham
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> From: Ron Van Putte <vanputte at cox.net>
> Date: July 1, 2007 9:40:03 AM CDT
> To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
> Subject: Re: [NSRCA-discussion] YS fuel
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070701/a7798509/attachment.html