[NSRCA-discussion] Soft mount for OS .46AX?
Dean Pappas
d.pappas at kodeos.com
Tue Jan 30 07:17:52 AKST 2007
Hi Tom,
It's quite light, and the Sport-Tabs mount is even lighter.
The rubber bits attach to four small aluminum tabs that tighten under the backplate screws.
These two mounts and the Sullivan backplate are probably the ones we should first be recommending to Sport folk
when they say they want to get quiet without spending big bucks.
Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Tom Simes
Sent: Tuesday, January 30, 2007 10:57 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Soft mount for OS .46AX?
On Tue, 30 Jan 2007 09:03:03 -0500
rcmaster199 at aol.com wrote:
> Tom,
>
> Another possibility is to make a Hyde type mount yourself from 3/32"
> aircraft ply, balsa and rubber bicycle innertube. It's very easy to
> make and would be the lightest and most effective solution for you.
> The whole thing is put together with ca glue.
Thanks for all the answers guys! Matt, what you're describing sounds a
bit like the instructions that Bob Pastorello put together for a
PastoMount:
http://www.rcaerobats.net/mount1.htm
If your version doesn't require a nose ring, I'm interested!
Vince, I couldn't find a Hyde or Budd mount that fit. I doubt either
one of them has idle time to make what would amount to a one off. Now
if the list did a group Reactor build... ;-)
Ron, you are right on - the mount I have on my Somethin' Extra is a
Sullivan backplate mount and not a K&B. My first option may be to find
one of those. The one on the Somethin' Extra has served well - and it
is a very light mount.
Dean, I'm going to take a look at the Dave Brown mount - it sounds just
a shade heavier but if it's in current production that sure beats the
Sullivan.
Tom
======================================================================
"Z-80 system stack overflow. Shut 'er down Scotty, the system's
sucking mud" - Error message on TRS 80 Model-16B
Tom Simes simestd at netexpress.com
======================================================================
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list