[NSRCA-discussion] PPG Concept and White primer base question

[Dean Funk]

thanks for the link Scott, those do look good.



--- Scott Smith <js.smith at verizon.net> wrote:

> What about one of these large 60cc syringes?
> 
> http://www.mertons.com/Tools/syringe.html
> 
> I picked one up last time I ordered...haven't found
> a use for it (until
> maybe now!)
> 
> Scott
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
> Behalf Of Dean Funk
> Sent: Sunday, January 28, 2007 3:36 PM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] PPG Concept and
> White primer base question
> 
> HI Guys,
> 
> yea I've been using epoxy mixing cups too, I
> personally like 4 oz glass measuring cups that you
> can
> get in kitchen depts at the grocery. it's got ml and
> oz , easier to clean and totally reusable- doesn't
> go
> out with the trash to the landfill every time  
> 
> I was asking for "the better ways" : ) 
> 
> also how about getting that 5 cc's out of the 16oz
> paint can?
> 
> If you ever tried pouring 5 cc's or for that matter
> 30cc of k-36 from the paint can - you waste about
> twice what yer pouring....
> 
> I've been using eyedroppers and teaspoons....
> 
> anyhow this is a great subject, I think I should
> start
> an RCU thread as a resource on everything paint....
> 
> thanks again all,
> Dean
> 
> 
> 
> 
> 
> 
> 
> --- "george w. kennie" <geobet at gis.net> wrote:
> 
> > The small plastic cups that I get from my LHS also
> > have graduations in cc's 
> > making it really easy to pour in 5 cc's and then
> > bring the total up to 6 
> > cc's with the activator, or any multiple desired.
> > G.
> > 
> > 
> > 
> > 
> > ----- Original Message ----- 
> > From: <jivey61 at bellsouth.net>
> > To: "NSRCA Mailing List"
> > <nsrca-discussion at lists.nsrca.org>
> > Sent: Sunday, January 28, 2007 12:53 PM
> > Subject: Re: [NSRCA-discussion] PPG Concept and
> > White primer base question
> > 
> > 
> > > Dean
> > > I use 1 oz plastic cups that have 1/4,1/2,3/4,oz
> > marks on them. They are
> > > similar to medicine cups.Pour carefully.
> > > Jim Ivey
> > > ----- Original Message ----- 
> > > From: "Dean Funk" <deanfunk1 at yahoo.com>
> > > To: "NSRCA Mailing List"
> > <nsrca-discussion at lists.nsrca.org>
> > > Sent: Sunday, January 28, 2007 12:09 PM
> > > Subject: Re: [NSRCA-discussion] PPG Concept and
> > White primer base question
> > >
> > >
> > >> thanks all, this list ROCKS!!!!
> > >>
> > >>
> > >> has anyone tried tinting the K-36 Prima with
> > concept
> > >> white ??
> > >>
> > >>
> > >> another question what is the best way to
> dispense
> > >> small quantities of the concept paints,
> > activators and
> > >> reducers.
> > >>
> > >> I am currently using eyedroppers, metal coffee
> > >> scoopers, small glass mixing cups, table spoons
> > >> etc....
> > >>
> > >> are there any other options that will not waste
> > more
> > >> than you actually are using...
> > >>
> > >> there has gotta be a better way
> > >>
> > >> thanks in advance all.....
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> --- Ken Thompson <mrandmrst at comcast.net> wrote:
> > >>
> > >> > Thanks for posting this Larry, it is now
> added
> > to
> > >> > "my favorites".
> > >> >
> > >> >
> > >> > ----- Original Message ----- 
> > >> > From: "Lisa & Larry" <lld613 at psci.net>
> > >> > To: "'NSRCA Mailing List'"
> > >> > <nsrca-discussion at lists.nsrca.org>
> > >> > Sent: Sunday, January 28, 2007 10:24 AM
> > >> > Subject: Re: [NSRCA-discussion] PPG Concept
> and
> > >> > White primer base question
> > >> >
> > >> >
> > >> > > Here is a link for PPG color mix chart that
> > was
> > >> > posted awhile back when I
> > >> > > was looking to repaint a cowl.
> > >> > >
> > >> > >
> > >> >
> > >>
> > >
> >
>
http://www.charlesriverrc.org/articles/construction/ppgpaintmatch.htm#Ultrac
> > >> > > ote%20White
> > >> > >
> > >> > >
> > >> > > Larry Diamond
> > >> > >
> > >> > > -----Original Message-----
> > >> > > From:
> > nsrca-discussion-bounces at lists.nsrca.org
> > >> > >
> > [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> > >> > On Behalf Of Mark Atwood
> > >> > > Sent: Sunday, January 28, 2007 9:43 AM
> > >> > > To: NSRCA Mailing List
> > >> > > Subject: Re: [NSRCA-discussion] PPG Concept
> > and
> > >> > White primer base question
> > >> > >
> > >> > > Dean,
> > >> > >
> > >> > > If you are looking for a "lighter" primer
> > than the
> > >> > K-36, the K-2 primer is
> > >> > > a
> > >> > > soft light cream color, and very nice to
> use,
> > just
> > >> > much harder to find. I
> > >> > > actually prefer it to the K-36.  It's not
> > white
> > >> > though...but much easier
> > >> > > to
> > >> > > paint a base white over.
> > >> > >
> > >> > > As for color matches..I have VERY good
> > matches for
> > >> > Monokote cub yellow,
> > >> > > white (which is NOT base white), and
> > Aluminum.
> > >> > Black is base black.
> > >> > >
> > >> > > If you need those...drop me a note offlist.
> > >> > >
> > >> > > -Mark
> > >> > >
> > >> > >
> > >> > > On 1/28/07 9:44 AM, "Dean Funk"
> > >> > <deanfunk1 at yahoo.com> wrote:
> > >> > >
> > >> > >> Hi all,
> > >> > >>
> > >> > >> I am looking for a white primer that is
> 
=== message truncated ===



 
____________________________________________________________________________________
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com