[NSRCA-discussion] Pull Pull Cable Tension Question

[Lisa & Larry]

Got it, Thanks...

Larry

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Richard
Lindberg
Sent: Monday, January 15, 2007 11:32 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Pull Pull Cable Tension Question

Here's the URL for Ackerman setups:

http://members.cox.net/bdfelice/Ackerman/ackerman.htm

FWIW, Bob Pastorello, et al,  discussed this on the list in November 
2004...!

Richard

----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, January 14, 2007 5:12 PM
Subject: Re: [NSRCA-discussion] Pull Pull Cable Tension Question


Larry
The Ackerman principle applys to pull-pull setups. Check the attachment.

Jim Ivey
  ----- Original Message ----- 
  From: Lisa & Larry
  To: NSRCA
  Sent: Friday, January 14, 2000 4:14 PM
  Subject: [NSRCA-discussion] Pull Pull Cable Tension Question


  Getting ready to string some cables.



  How tight do the cables need to be? Too loose causes flutter I think and 
to tight start folding the fuse in half.



  I have never had to do this before..



  Larry



----------------------------------------------------------------------------
--


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------
----


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion