[NSRCA-discussion] servo support

[Bob Miller]

  ----- Original Message ----- 
  From: Dave Burton 
  To: NSRCA Mailing List 
  Sent: Sunday, January 14, 2007 10:00 AM
  Subject: Re: [NSRCA-discussion] servo support



  Servo support devices.
  Sounds like a solution in dire need of a problem!
    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Lance Van Nostrand
    Sent: Sunday, January 14, 2007 11:47 AM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] servo support


    Sorry, but I have to question this.  I don't see how this can work well.  It is very pretty and has all the right materials (ball bearings, carbon fiber), but from a geometric point of view it raises many questions.  The carbon base is cantilevered to the aluminum standoffs and the mounting screw line is normal to the load, doing nothing to support the load.  The standoffs put pressure on the CF base ina point load, something CF is poor at withstanding.  THe geometric stability is provided only by the aluminum standoff diameter, which is minimal.

    The old JR ones worked, but barely.  The base was a full metal frame, which improved the standoff cantilever problem.  As long as the metal frames were straight and the aluminum standoffs were tightly screwed in and any bending was prevented (once bent they never worked right again).  

    Granted, these can be installed but whether or not they relieve the stress on the servo is a totally different matter.  A design that I would believe in would increase the base of the standoffs.  One way would be to use the MK fluted control arms.  Another would be to make a triangular standoff with the base wide at the bottom and lined up with the servo stress.

    -Lance
      ----- Original Message ----- 
      From: george w. kennie 
      To: NSRCA Mailing List 
      Sent: Saturday, January 13, 2007 9:42 PM
      Subject: Re: [NSRCA-discussion] servo support


      Boy, that looks even more positive than the JR type that I've been using for years. Good stuff Rex !
      G.



        ----- Original Message ----- 
        From: Rex LESHER 
        To: NSRCA Mailing List 
        Sent: Saturday, January 13, 2007 6:05 PM
        Subject: Re: [NSRCA-discussion] servo support


        Here's two more, of a different variety....   one for Futaba, one for JR servos.
        http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=4DRCF  for Futaba servos....

        http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=4DRCJ   for JR servos....

        These are a little different, but they have lots of neat parts on them...   If the standard JR support has changed and did away with the 
        metal frame, these might be better for our use....  

        Rex


          ----- Original Message ----- 
          From: JFGREEN 
          To: 'NSRCA Mailing List' 
          Sent: Saturday, January 13, 2007 2:45 PM
          Subject: [NSRCA-discussion] servo support


          Does anyone know anyone other  than Horizon that might carry the KS servo support.  Horizon is out of them – Jerry green



          --
          No virus found in this outgoing message.
          Checked by AVG Free Edition.
          Version: 7.1.410 / Virus Database: 268.16.10/625 - Release Date: 1/13/2007


          _______________________________________________
          NSRCA-discussion mailing list
          NSRCA-discussion at lists.nsrca.org
          http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070115/00f472ea/attachment.html