[NSRCA-discussion] Programming the E-flite 40A ESC

[Ed Alt]

Yeah, I was afraid of that.  I'm just trying to avoid adding any weight to this.
  ----- Original Message ----- 
  From: Fred Huber 
  To: NSRCA Mailing List 
  Sent: Sunday, January 14, 2007 4:41 PM
  Subject: Re: [NSRCA-discussion] Programming the E-flite 40A ESC


  Generally you can't alter the BEC output voltage of an ESC.

  You can disable the BEC and get a separate "UBEC" with 6.0 v output. (and higher current rating)
    ----- Original Message ----- 
    From: Ed Alt 
    To: nsrca-discussion at lists.nsrca.org 
    Sent: Sunday, January 14, 2007 2:48 PM
    Subject: [NSRCA-discussion] Programming the E-flite 40A ESC


    Just wondering if anyone knows of a way to program the BEC voltage output on this ESC?  It's only set to 5V and I would like to get some more speed out of the servos.

    Thanks
    Ed



----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 


----------------------------------------------------------------------------


    No virus found in this incoming message.
    Checked by AVG Free Edition.
    Version: 7.1.410 / Virus Database: 268.16.10/624 - Release Date: 1/12/2007



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070114/1212014e/attachment.html