[NSRCA-discussion] Controll Systems

[Dean Pappas]

But how about a 1/8 birch dowel riding in a Nyrod outer tube?
 
 

Dean Pappas 
Sr. Design Engineer 
Kodeos Communications 
111 Corporate Blvd. 
South Plainfield, N.J. 07080 
(908) 222-7817 phone 
(908) 222-2392 fax 
d.pappas at kodeos.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of rcmaster199 at aol.com
Sent: Friday, January 12, 2007 1:11 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Controll Systems


Hmmm! A balsa push rod riding in a carbon tube reinforced teflon tube. Now you're talkin' (VBG)
 
Matt 
 
 
-----Original Message-----
From: natpenton at centurytel.net
To: nsrca-discussion at lists.nsrca.org
Sent: Thu, 11 Jan 2007 10:08 PM
Subject: [NSRCA-discussion] Controll Systems


I'm probably the originator of the .070 carbon-dep system - about 86. Carbon/balsa fuses and kevlar/balsa fuses , are poor combinations, and I'm still using them. Both systems are vulnerable to temp and/or humidity changes and are a pain. Since I've been doing this since 86 I must be a slow learner. No slop but sometimes a trim change every hour.
 
With balsa fuses, for elev, I plan to go (back) to a balsa dowell pushrod and use a crossover ( MK, or custom ? ) just in front of the stab. Not sure how to handle the rudder, two small hard balsa dowells ? I've had undue kevlar tension ruin two DS8411sa servos on an electric.                              Nat
_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion%40lists.nsrca.org> 

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


  _____  

 <http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom%2Fnewaol> Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070112/88c4cb15/attachment-0001.html