[NSRCA-discussion] Controll Systems

[rcmaster199 at aol.com]

Hmmm! A balsa push rod riding in a carbon tube reinforced teflon tube. Now you're talkin' (VBG)
 
Matt 
 
 
-----Original Message-----
From: natpenton at centurytel.net
To: nsrca-discussion at lists.nsrca.org
Sent: Thu, 11 Jan 2007 10:08 PM
Subject: [NSRCA-discussion] Controll Systems


I'm probably the originator of the .070 carbon-dep system - about 86. Carbon/balsa fuses and kevlar/balsa fuses , are poor combinations, and I'm still using them. Both systems are vulnerable to temp and/or humidity changes and are a pain. Since I've been doing this since 86 I must be a slow learner. No slop but sometimes a trim change every hour.
 
With balsa fuses, for elev, I plan to go (back) to a balsa dowell pushrod and use a crossover ( MK, or custom ? ) just in front of the stab. Not sure how to handle the rudder, two small hard balsa dowells ? I've had undue kevlar tension ruin two DS8411sa servos on an electric.                              Nat
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
________________________________________________________________________
Check out the new AOL.  Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070112/ae40ab18/attachment.html