[NSRCA-discussion] Pull-Pull

[Jay Marshall]

Well then, no logical reason. All, including myself, agree that it works; I
also use it. It would also seem that if a tensioner is used, as with timing
belts on a car, that the trim-change-with-temperature-due-to-fuse-expansion
problem would disappear.


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
Sent: Wednesday, January 10, 2007 9:15 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Pull-Pull


On Jan 10, 2007, at 8:09 AM, Gene Maurice wrote:

> I have been using pull-pull on elevators for 15 years with great  
> success. It
> is a little more difficult to setup, but once done, it is  
> completely idiot proof.


Gene - I'm absolutely sure someone will say, "Well, you should know",  
but not me.  <VBG>

Ron Van Putte

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion